Microwave Sensor Switch
The simplest most cost effective retrofit and new automatic lighting control unit for energy saving.
For a wide range of low cost applications including converting existing (and new) internal and external standard ceiling or wall mounted luminaires to microwave sensor versions. Daylight, hold time and sensitivity selectable via dip switches. Replaces the terminal block i.e. power in and power out to the LED driver.
APPLICATIONS
New and retrofit fittings.
Corridors, stairwells, external lighting
BENEFITS
- Low cost
- Simple to install
- Energy saving
For pricing and any further information please call us on 0121 726 6999 or make an enquiry via our contact form.
| Order code | AE-MWS030 |
| Operating Voltage | 220-240Vac, 50Hz |
| Rated load | 400W (Inductive 800W (resistive) |
| HF System | 5.8GHz ± 75MHz, ISM wave band |
| Transmitting Power: | <0.5mW |
| Power Consumption: | ≤ 0.5W (standby) |
| Detection Zone: | Max. (D x H): 12m x 6m |
| Detection Sensitivity: | 10% / 25% / 50% / 75% / 100% |
| Hold time: | 5s / 30s / 90s / 3min / 20min / 30min |
| Daylight Sensor: | 2lux / 10lux / 25lux 50lux / Disable |
| Mounting height: | 6m Max. |
| Motion detection: | 0.5 - 3m/s |
| Detection angle: | 150º (wall installation) 360º (ceiling installation) |
| Operating temp: | -20ºC to 60ºC |
| IP rating: | IP20 |
Contact Avanti Lighting
AVANTI LIGHTING LTD
Lighting Years Ahead!
T: 0121 726 6999
F: 0121 726 6997
PRODUCTS
FIND US